Daniil Antonov - Резюме Строитель. Технический специалист

MC-BAUCHEMIE (building industrial technology) [10.2020-17.10.2022]
MC-Bauchemie has been in existence for more than 55 years and is one of
the world's leading manufacturers of building materials and a
developer of technologies for their effective use.
Technical Specialist infrastructure and industrial construction
 Implementation of pilot sites at construction sites with
a demonstration of building materials and systems
 Technical support of work at construction sites
 Production of product samples
 Testing of materials
 Consumer advice
 Collection of feedback about products
 Processing claims
 Conducting master classes and trainings
 Work with injection equipment, application of coatings by
hand/machine methods, performance of a full range of works on the
application of polymer floors, work with polymer compositions, use
of machine application equipment, demonstration of materials and
their systems
 Elimination of active water filtration in buildings
 Implementation of personnel certification (quality standards
when working with building materials)
 Repair of cracks in concrete
 Knowledge and experience with various types of injections using
epoxy and polyurethane materials
 Repair and protection of concrete
 Epoxy and polyurethane resin flooring systems

DAW (Deutche Amphibolin-Werke von Robert Murjahn" (leader in the production of paints and varnishes and
solutions for facades) [06.2017-09.2020] https://www.daw-se.ru/
Founded in 1895 in Germany. The German company DAW is one of the largest European manufacturers of paints and
varnishes and building materials, thermal insulation systems for facades, flooring, decorative materials for
creative interior design.
Technical Specialist
 Elaboration of design solutions and performance of calculations in order to agree / renegotiate materials
or constructs
 Development and updating of technical regulations and guidelines for the use of materials
 Introduction of new technical developments of the Company
 Conducting technical seminars for design and construction organizations, employees of distributors
 Claim handling
 Implementation of construction quality control
 Reading design estimates
 Working on high-tech tinting equipment, making samples
 Knowledge at a high level of normative and regulatory documentation (interior decoration, facade)
 Participation in production and business meetings
 Execution of experimental sites at construction sites with a demonstration
 Technical support of works on objects
 Production of product samples


SAINT-GOBAIN (The company develops innovative solutions for construction, renovation, industry and
transport.) [02.2015-05.2017] https://saint-gobain.ru/
Key account manager
I Worked for a separate division of Weber-Vetonit, which is a world leader in the development of innovative
integrated solutions for construction and renovation
 Maintaining active sales in the assigned territory in the areas of DIY and B2B
 Site visits, orientation of the Customer to make a decision in favor of our building materials
 Optimization and introduction of building materials, ready-made solutions into the construct.
 Selection of technical solutions based on the requirements of the Customer
 Search of new perspective dedicated distributors, dealers and agents
 Control of supply of materials.
 Registration of products;
 Preparation and participation in state tenders;
 Organization of presentations, holding master classes.
 Control of merchandisers in large chain stores

Private Practice / Freelancing [03.2012-01.2015]
Builder-finisher
Repair, construction, decoration.
 Performance of repair and finishing, construction works (apartments, houses, commercial premises)
 Coordination of project documentation with the customer
 Quality control in the field of general construction works, installation of engineering equipment, finishing works.
• Drafting and signing of acts of work performed
• All types of finishing construction works (Drywall, tiling works, plastering, plumbing, painting
works screeds, levelers, linoleum, laminate. Partitions and other types of drywall work

2013 St. Petersburg College of Economics, Management and Law.
Qualification: lawyer, jurisprudence

2017 Baltic State Technical University VOENMEH them. D.F. Ustinov,
St. Petersburg. Qualification: Engineer of weapons and weapons
systems, Small arms, artillery and rocket weapons

2020 St. Petersburg State University of Communications, St.
Petersburg Industrial and civil construction, POSTGRADUATE
Building materials and technologies

* Knowledge and experience with complex
construction equipment (pumps, stations
and other equipment) work with injection
equipment, applying paintwork materials
by hand/machine, performing a full
range of works on applying polymer
floors, working with polymer
compositions, using machine application
equipment, demonstrating materials and
their systems;
* Experience in hydraulics, knowledge of
the basics of mechanics, pneumatics
* Development and adjustment of
technical documentation
* Organization and holding of technical
seminars
*Architectural supervision of the
compliance of the materials and
technologies used in the construction of
the supervisory facility
*Knowledge and use of all building
material

I am an educated and self-confident person focused on results. Constant desire to develop and increasespecialization and experience. A high level of responsibility and independence, excellent skills in planning my working time, I have experience in managing construction teams as a foreman. Active life position, desire to develop mutually beneficial with the organization. Result Oriented. I have experience
in finishing works in construction.
Working with injection equipment, applying paintwork materials by hand/machine, performing a fullrange of work on applying polymer floors, working with polymer compositions, using machine application equipment, demonstrating materials and their systems.