Досвід роботи:
Process control engineer
Place of work: OOO Agropromkomplektatsiya, Kursk
June 2020 - present
Ensuring the operation of the SCADA system. Collection of analog and discrete signals, reading data via RS-485 and Ethernet interfaces - using the Modbus protocol, OPC UA
Development of projects in the MasterScada 4D environment for PLC Wirenboard 6 (with open source software based on Linux). Using the IEC 61131-3 Structured Text (ST) language.
Commissioning engineer
Place of work JSC NPK Mediana-Filter. Moscow. mediana-filter.com.
March 2017- June 2020
Knowledge of water treatment technologies, control of installation work, setting up the operation of process equipment.
Reverse osmosis systems, continuous electrodeionization systems, heat exchangers, and much more. Work with controllers: Mitsubishi Al2, Siemens Simatic S7 1200 (has little experience in creating projects in TIA Portal 15), Siemens Simatic S7 300. Frequency converters Schneider Electric, ABB, Danfoss.
Engineer (medical equipment Fresenius 4008S)
Place of work LLC "Regional dialysis center". Kursk
April 2015 — February 2017
Repair and operation of Fresenius 4008S artificial kidney devices, was trained by the manufacturer. Operation of the system for receiving storage and distribution of water for hemodialysis.
Engineer (medical equipment)
Place of work LLC "Medtechpharm". Kursk
August 2013-February 2017
Service engineer in a medical clinic. Working with various equipment sterilization equipment, laboratory analyzers, ultrasound machines, etc. General Electric, Toshiba, Roche.
Освіта:
Higher education. Qualification – Specialist
2007-2012
Southwestern State University, Kursk.
Specialty: Biotechnical and medical devices and systems.
Професійні та інші навички:
good ones )
Додатково:
I have a family with two children. Will consider offers in other countries
